The Dulles Metrorail Project is a 23-mile extension of the existing Metrorail system from East Falls Church to the Washington Dulles International Airport. Constructed in two phases, the first phase is a $1.6 billion design-build project that includes over 5.2 miles of precast segmental concrete aerial structures through Tysons Corner, Virginia’s largest employment center. When both phases are completed, it will provide rail service from the airport to downtown Washington. The precast segmental concrete bridges total over 5.2 miles in length with a maximum span length of 173′. Twin structures supported on common piers are used with one box girder supporting each track. The precast superstructure segments are typically 15′ wide, 10′ long and are prefabricated on airport property. Spans are typically 130′ long, simply supported with no closure joints, and segments are erected span-by-span using a self-launching, overhead gantry. Segments are erected in balanced cantilever over I-495.
Corven Engineering role: Engineer of Record for the segmental superstructure design, Construction Engineering. Initial design and bid quantities; final design and specifications; integrated shop drawings for the precast superstructure segments, construction analysis, post-tensioning stressing data, review of step-by-step erection procedures; review of three dimensional casting geometry; engineering support during construction; and on-site technical support.